
Stop Cleaning Your Pool By Hand. Let the Robot Handle It.
Every pool needs cleaning. Only one robot does it while you relax. The Gosvor LiteVac 800 is a fully cordless, autonomous robotic pool cleaner that navigates your pool floor on its own, captures debris and dirt with powerful dual-motor suction, and self-parks at the wall when it’s done — no cords to untangle, no manual scrubbing, no complicated setup. One button press. 90 minutes of cleaning. Up to 860 sq. ft. covered per charge. At just 7.5 lbs with a 15-second drainage design, it’s as easy to take out as it is to put in. Whether you have a backyard above-ground pool or a flat-floored inground pool, you’ll wonder how you ever maintained it without this.
Real Results From Real Pool Owners
A Cleaner Pool. Less Work. From the Very First Run.
97%
Said the LiteVac 800 cleaned their pool more thoroughly than their previous manual or corded method.
95%
Said setup was simple and their pool cleaner was running within minutes of opening the box.
96%
Reported that the 90-minute battery life was sufficient to fully clean their pool in a single session.
98%
Would recommend the SunStages LiteVac 800 to a friend, neighbor, or fellow pool owner.
The SunStages LiteVac 800 is trusted by thousands of pool owners who want a hands-free, cordless way to keep their pool clean — from busy family pools to weekend retreats and everything in between.
Drop it in. Press one button. Come back to a spotless pool.
Most pool cleaners require hoses, wall fittings, or constant supervision. The SunStages LiteVac 800 needs none of that — just water and one button press. Dual high-efficiency motors power deep suction that captures everything from fine dust and sand to large leaves and debris. It navigates your pool floor autonomously, covering every corner in a systematic path. When the battery drops low, Smart Auto-Parking guides it directly to the pool edge and sounds an alert so you always know exactly where to find it. Pull it out by the handle — it drains completely in 15 seconds — rinse the filter under the tap, and it’s ready for the next session. A 3-hour recharge delivers 90 minutes of runtime, covering pools up to 860 sq. ft. in a single clean. This is what maintaining a pool should feel like.
FAQ's
What pool types is the LiteVac 800 compatible with?
What pool types is the LiteVac 800 compatible with?
The Gosvor LiteVac 800 is designed for above-ground pools and flat-floored inground pools up to 860 sq. ft. It works on flat, even pool floors and performs best in pools without slopes, curves, or irregular shapes. It is not recommended for pools with sloped floors, curved bottoms, or pools that are significantly larger than 860 sq. ft., as the battery may not cover the full area in one session. If you’re unsure about your pool’s compatibility, measure your pool floor surface area and compare it against the 860 sq. ft. coverage rating.
How does the Smart Auto-Parking feature work?
How does the Smart Auto-Parking feature work?
When the LiteVac 800 detects that its battery is running low, it automatically stops its cleaning path and navigates toward the nearest pool wall, where it parks itself and sounds an audible alert to notify you. This means you never have to fish around in the pool trying to locate the unit — it always comes to you. The auto-park feature activates at a preset battery threshold so there’s still enough power to complete the navigation to the wall before shutting down completely.
How do I clean and maintain the filter?
How do I clean and maintain the filter?
The LiteVac 800 has a built-in reusable filter that captures both coarse debris and fine particles. After each cleaning session, lift the unit out of the pool using the handle, allow it to drain (takes under 15 seconds), then open the filter compartment, remove the filter basket, and rinse it under a tap or hose until the water runs clear. Reinsert the filter and the unit is ready for its next session. The filter is designed for long-term reuse and does not need to be replaced under normal use conditions. We recommend cleaning the filter after every 2–3 sessions for best performance.
How long does the battery last and how do I charge it?
How long does the battery last and how do I charge it?
The LiteVac 800 provides up to 90 minutes of continuous cleaning on a full charge, which is enough to cover pools up to 860 sq. ft. in a single run. Charging is done via the included charging cable — simply plug it into the unit and a standard power outlet. A full charge takes approximately 3 hours. We recommend charging after each use so the unit is always ready for its next session. Do not charge the unit while it is submerged in water. The battery indicator will show charge status so you can monitor it easily.